One of the most well-known problems that has accompanied the operating system faithfully since its release is the shutdown problem. When you click on Shutdown, nothing happens or your PC restarts? Does it even hang? There are many causes that lead to such a problem. In this small shutdown guide, you are sure to find what you are looking for if your system makes a mess when shutting down.
In most cases, the built-in hardware is the culprit in this dilemma. However, incorrect Windows settings can also delay or even prevent the shutdown. If this occurs, the operating system usually freezes immediately, which you can tell by a stuck mouse pointer.
Die folgenden Tipps beschreiben alle möglichen Sorten von Shutdownproblemen und bringen auch gleich die korrekte Lösung mit…
Lösungsmöglichkeit 1 – Die automatisch geladenen Programme abschalten
The Windows Me autostart programs are also responsible for incorrect shutdowns. Some of them become entangled in errors and Windows is then no longer able to deactivate them and thus remains stuck during shutdown.
1. Click one after the other on Start > Execute and type it into the command line msconfig in.
2. Switch to the register Autostart and uncheck all options. If the shutdown (preceded by a restart) now works, you must gradually reactivate the options until the culprit has been tracked down.
For more information, I recommend the article Deactivate hidden autostart programs to read through.
Lösungsmöglichkeit 2 – Hardwarekomponente abschalten
In some cases, devices and their drivers cause problems when shutting down because they cannot be deactivated properly by Windows. However, as you do not know which part of your PC's innards is responsible for this, you should deactivate them one by one. However, you only need to deactivate the parts that are not critical to the system: Modem, TV cards, network cards or video editing cards would be some examples.
1. Click with the right mouse button on Workplace and select Properties from the context menu.
2. You will now find yourself in a new window in which you can select the Device Manager and double-click on the modem, for example, so that the properties window appears.
3. In this new window, search for the entry Deactivate in this hardware profile and put a tick in front of it.
Now repeat this with all components that are not required for a short time. If, for example, the shutdown works after deactivating the sound card, I recommend going to the manufacturer's website and downloading the latest drivers.
Lösungsmöglichkeit 4 – Die Klänge beim Herunterfahren
The sound that is played during shutdown also causes difficulties in some cases when Windows is shut down. This audio file only needs to have a minor defect and Windows will no longer play.
It is therefore highly recommended to deactivate this sound:
1. Click in succession on Start/Settings and select System control.
2. Double click here on Sounds and multimedia and go to Events downwards until the entry Exit Windows appears. Select it and click under Name on None.
3. It should be confirmed with OK directly to see if the shutdown finally works.
Lösungsmöglichkeit 5 – Die APM Energieverwaltung
Advanced Power Management is often deeply involved when it comes to shutdown problems. It personally ensures that the computer is switched off (as well as in standby mode). On some computers, switching off APM helps, while the problems disappear when APM is activated on other computers.
To activate or deactivate APM, you must go through the following steps:
1. Go to the Control Panel and double-click on Energy options.
2. Now switch to the tab APM and (de)activate Advanced Power Management there.
A restart and your shutdown problem will hopefully have disappeared.
Lösungsmöglichkeit 6 – Einstellungen fürs Power Management
However, it is not only the APM control mentioned above that could cause errors. The conventional energy settings are also sometimes the simple triggers when the computer does not shut down automatically.
1. Click in succession on Start/Settings and switch to System control in the energy options.
2. Now set Standby mode, Switch off hard disk and switch off the monitor.
Lösungsmöglichkeit 7 – Werte in der Windows Registrierung
The so-called registry also contains some values that prevent the shutdown. To make these disappear, you must proceed as follows:
1. In the Start menu, click on Execute and enter there regedit in.
2. After the registry editor has started, navigate through the keys HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ Shutdown\ExclusionList
3. You can see under ExclusionList in the right-hand pane to delete some entries immediately.
4. After a restart, a smooth shutdown should be guaranteed.
Lösungsmöglichkeit 8 – Temporäre Dateien löschen
For some inexplicable reason, the temporary files in the Windows directory also cause a lot of trouble during shutdown, which can lead to hangs or bad error messages. Possibly because Windows is still permanently accessing these files and thus preventing the shutdown, but this is only a guess.
1. Double-click on Workplace and switch to C:\ > WINDOWS > TEMP.
2. Here you delete all files that you find.
Lösungsmöglichkeit 9 – Den internen PC Lautsprecher abschalten
Aufgrund von Inkompatibilitäten mit der Hardware stört auch in seltenen Fällen der PC Lautsprecher, welcher ins Gehäuse eingebaut ist, das korrekte Herunterfahren von Windows. Es ist daher ratsam ihn zu deaktivieren…
1. Click on Start/Execute and carry System.ini in. The text editor appears with the content of this important system file.
2. Now search for the line wave=speaker.drv and delete them.
Here, too, a restart should finally provide a remedy!
Lösungsmöglichkeit 10 – Den Windows Tweaks Patch installieren
We have found another way for you in the Windows registry to get rid of the shutdown problem once and for all. It is stored for you in a convenient registry file.
1. Click here to download the patch.
2. Once it is on your hard disk, all you have to do is double-click on it and confirm. A restart will apply the changes to the system.
Lösungsmöglichkeit 11 – Die aktuellen CAPI Treiber installlieren
With the Windows ME CAPI drivers for ISDN cards, inconsistencies may also occur in rare cases during shutdown. If you are using a Fritz! card, I advise you to update your software, which you can do from the manufacturer's homepage. I received this tip from a user for whom this was the cause.
Lösungsmöglichkeit 12 – Ist Ihre Tastatur/Maus über USB angeschlossen?
If you have connected your keyboard to the USB port, this could get in the way of the shutdown. In the case of a Logitech keyboard, help was provided by Logitech support in the forum as follows:
1. Proceed as in steps 1 and 2 of possible solution 2 in order to Device Manager to open.
2. Double-click on USB root hub, Universal VIA controller (USB) (if these are available) and the entry for your keyboard and mouse. Now switch to Energy resp. Energy management and deactivate the option Allow the computer to switch off the device to save energy and restart your computer.
After a restart, these shutdown problems may be solved. If not, in the case of a Logitech keyboard, you can fix it with driver version 2.13 of the iTouch software (Download this as well as the patch and its instructions). The current version 2.15 is unfortunately faulty! The same applies to many driver versions: The latest version is not always the best. So check for problems on the Internet before you click the shutdown guide away in frustration!
Lösungsmöglichkeit 13 – Maus/Tastatur Aufwachfunktion
Windows tweaks reader Grizzly was also plagued by the famous shutdown problem: all peripheral devices on the computer switch off but the main components remain active. He shared the solution with us by e-mail:
1. Starten Sie den Problemrechner und drücken Sie „Removal„, „F2“ oder eine andere Taste (siehe Dokumentation Ihres Rechners), um ins BIOS zu gelangen. Suchen Sie hier z.B. unter Power Management nach Einträgen, die „Keyboard Function Power up“ und „Mouse Function Power up“ genannnt werden. Hinweis: Die Bezeichnung dieser Einträge sind von BIOS zu BIOS unterschiedlich.
2. Deactivate these entries by clicking on Disabled or Off to adjust the settings. This is usually done using the Enter key or the Page Up and Page Down keys.
After saving the settings (Save & Exit Setup), Windows should now shut down properly.
NOTE FOR NEW PUBLICATION: This article was produced by Sandro Villinger and comes from the Windows tweaks archive, which has been built up since the late 1990s.
